Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-3030001.png)
Headlamp Wiper Relay: Testing and Inspection
WIPER / WASHER: RELAY (w/ Headlight Cleaner System): ON-VEHICLE INSPECTION
1. INSPECT HEADLIGHT CLEANER CONTROL RELAY
(a) Disconnect the A44 headlight cleaner control relay connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(c) If the result is not as specified, there is a malfunction in the wire harness.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(e) If the result is not as specified, there is a malfunction in the wire harness.
