RAV4 2WD L4-2.0L (1AZ-FE) (2003)
/Page-340010.png)
a
Install the timing chain on the crankshaft timing sprocket with the blue or orange mark link aligned with the timing mark on the crankshaft
timing sprocket.
b
Install the timing chain on the camshaft timing sprocket and VVT timing sprocket with the gold or yellow mark links aligned with the timing
marks on the camshaft timing sprocket and VVT timing sprocket.
6. INSTALL TIMING CHAIN GUIDE
Install the timing chain guide with the bolt.
Torque: 9 Nm (90 kgf-cm, 80 inch lbs.)
7. INSTALL CHAIN TENSIONER SLIPPER
a
Install the slipper with the bolt.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
b
Check that the slipper is hold on the cylinder block stopper.
