RAV4 2WD L4-2.0L (1AZ-FE) (2003)
c
Check only the valves indicated as shown. Measure the valve clearance (See step (a)).
6. ADJUST VALVE CLEARANCE
a
Set the No. 1 cylinder to the TDC/compression (See step 4).
b
Place matchmarks on the timing chain and camshaft timing sprockets.
c
Remove the 2 nuts, gasket and chain tensioner.
d
Hold the hexagonal head portion of the camshaft with a wrench, and loosen the camshaft timing sprocket bolt.
NOTICE: Be careful not to damage the cylinder head and valve lifter with the wrench.
e
Uniformly loosen and remove the 10 camshaft bearing cap bolts in several passes, in the sequence shown.
f
Remove the 5 camshaft bearing caps.