RAV4 2WD L4-2.0L (1AZ-FE) (2003)
p
Apply a light coat engine oil to new valve lifter.
q
Reinstall the valve lifter.
r
Align the crankshaft pulley groove with timing mark 0 of the timing chain cover.
s
Hold the timing chain.
7. REINSTALL INTAKE CAMSHAFT
a
Align the matchmarks on the timing chain and VVT timing sprocket (See step 6 (b)), and place the intake camshaft on the cylinder head.
b
Apply a light coat engine oil on the threads and under the camshaft bearing cap bolts.
c
Install the 5 intake camshaft bearing caps in their proper locations.
d
Uniformly tighten the 10 bearing cap bolts in several passes, in the sequence shown.
Torque:
29.5 Nm (300 kgf-cm, 22 ft. lbs.) for bolt A
9 Nm (90 kgf-cm, 80 inch lbs.) for others
e
Align the matchmarks on the timing chain and camshaft timing sprocket (See step 6 (b)), and install them.
8. REINSTALL EXHAUST CAMSHAFT
a
Temporarily install the camshaft timing sprocket with the timing chain to the exhaust camshaft with the bolt.
b
Place the exhaust camshaft on the cylinder head.
c
Apply a light coat engine oil on the threads and under the camshaft bearing cap bolts.
d
Install the 5 exhaust camshaft bearing caps in their proper locations.
e
Uniformly tighten the 10 bearing cap bolts in several passes, in the sequence shown.
Torque:
29.5 Nm (300 kgf-cm, 22 ft. lbs.) for bolt A
9 Nm (90 kgf-cm, 80 inch lbs.) for others