RAV4 2WD L4-2.0L (1AZ-FE) (2003)
Transmission Position Switch/Sensor: Service and Repair
ON-VEHICLE REPAIR
1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
2. REMOVE PARK/NEUTRAL POSITION SWITCH
a. Remove the nut.
b. Remove the nut, washer and control shift lever.
c. Using a screwdriver, pry off the lock plate.
d. Remove the nut and lock plate.
e. Remove the 2 bolts and pull out the park/neutral position switch.
3. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH
a. Install the park/neutral position switch with the 2 bolts.