RAV4 2WD L4-2.0L (1AZ-FE) (2003)
Seat Belt Tensioner: Testing and Inspection
Collision / Non-Collision Inspections
INSPECTION
1. PRETENSIONER IS NOT ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for cuts and cracks in, or marked discoloration of the center pillar lower garnish.
-
Check for cuts and cracks in floor wire harnesses, and for chipping in connectors.
-
Check for deformation of the center pillar.
CAUTION: For removal and installation of the front seat outer belt. Be sure to follow the correct procedure.
2. PRETENSIONER IS ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for deformation of the center pillar.
-
Check for damage on the connector and wire harness.