RAV4 2WD L4-2.0L (1AZ-FE) (2003)
REMOVE FRONT AIRBAG SENSORS
a. Disconnect the front airbag sensor connector.
NOTE: Disconnect the connector with sensor assembly installed.
b. Remove the 2 bolts and front airbag sensor.
c. Remove the LH and RH sensors.
INSTALLATION
INSTALL FRONT AIRBAG SENSORS
a. Install the front airbag sensor with the 2 bolts.
Torque: 8 N.m (80 kgf.cm, 69 in.lbf)
b. Connect the front airbag sensor connector.