RAV4 2WD L4-2.0L (1AZ-FE) (2003)
/Page-895003.png)
g. Turn SST (B), and remove SST (A and B).
h. Remove the pulley nut and pulley.
5. REMOVE RECTIFIER END FRAME
a. Remove the 4 nuts and wire clip.
b. Using SST remove the rectifier end frame.
SST 09286-46011
c. Remove the generator washer from the rotor
6. REMOVE ROTOR FROM DRIVE END FRAME
REASSEMBLY
1. INSTALL ROTOR TO DRIVE END FRAME
a. Place the drive end frame on the pulley.
