RAV4 2WD L4-2.0L (1AZ-FE) (2003)
a. Measure the distance between each wheel disc and corner of the cam bracket, then confirm that both are the same.
Lower suspension arm length difference: 1 mm (0.04 inch) or less
If the difference between the left and right is more than 1 mm (0.04 inch), adjust it by following the step (b) to (d).
b. Loosen the toe-adjust cam lock bolt.
c. Turn the toe-adjust cam an equal amount to adjust toe in.
HINT:
-
Try to adjust the toe-in to the center value.
-
The toe-in will change about 2.5 mm (0.10 inch) with each graduation of the cam (both side).
d. Torque the lock bolts.
Torque: 132 Nm (1,350 kgf-cm, 97 ft. lbs.)