RAV4 2WD L4-2.0L (1AZ-FE) (2003)
a. Using SST, press out the oil seal.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07360)
NOTICE: Be careful not to damage the rack housing.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00230, 09951-00400, 09952-06010), 09950-70010 (09951-07360)
NOTICE:
^
Make sure to install the oil seal facing in the correct direction.
^
Take care that the oil seal does not get reversed as you install it.
3. REPLACE BUSHING AND LOWER OIL SEAL OF CONTROL VALVE ASSEMBLY
a. Using SST, remove the bushing from the rack housing.
SST 09612-24014 (09613-22011)
NOTICE: Be careful not to damage the rack housing.
HINT:
^
Separate the SST as shown in the illustration to use it.