RAV4 2WD L4-2.0L (1AZ-FE) (2003)
Using SST and a torque wrench, measure the turning torque of the U/D input shaft.
SST 09387-00050, 09564-16020
Turning torque at 60 rpm: 0.10 - 4.41 Nm (1 - 45 kgf-cm, 0.9 - 39.0 inch lbs.)
HINT: Use a torque wrench with a fulcrum length of 160 mm (6.30 inch).
4. STAKE LOCK NUT
Using a pin punch and hammer, stake the lock nut.
NOTICE: Make sure that there are no cracks on the nut.