RAV4 2WD L4-2.0L (1AZ-FE) (2003)
/Page-744001.png)
Pressure Plate: Service and Repair
CLUTCH UNIT
REMOVAL
1. REMOVE TRANSAXLE FROM ENGINE
2. REMOVE CLUTCH COVER AND DISC
a. Align the matchmarks on the clutch cover with the one on the flywheel.
b. Loosen each set bolt one turn at a time until spring tension is released.
c. Remove the set bolts, and pull off the clutch cover with the clutch disc.
NOTICE: Do not drop the clutch disc.
