RAV4 2WD L4-2.4L (2AZ-FE) (2004)
c. Coat the glass with adhesive as shown in the illustration.
A: 12.0 mm (0.472 in.)
B: 8.0 mm (0.315 in.)
9. INSTALL BACK DOOR GLASS
a. Install the back door glass to the back door.
HINT: Confirm that the dams is attached to the back door panel.
b. Hold the back door glass in place securely with a protective tape or equivalent until the adhesive hardness.
NOTE: Take care not to drive the vehicle during the time described in the table.
10. INSPECT FOR LEAKS AND REPAIR
a. Conduct a leak test after the hardening time has elapsed.
b. Seal any leak with auto glass sealer.
Part No. 08833-00030 or equivalent
11. INSTALL WIPER ARM
12. INSTALL STOP LIGHT