toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Sunroof / Moonroof Switch > < Sunroof / Moonroof Relay|Locations|Page 6025
Page 1
background image

Sunroof / Moonroof Relay: Testing and Inspection

CHECK SLIDING ROOF CONTROL SWITCH AND RELAY CIRCUIT

(a) Disconnect the connector from the switch and relay. Check the connector on the wire harness side as shown in the table.

* Exceptions: For 40 seconds after the ignition switch is turned from ON to OFF (ACC) or until the driver or passenger door is opened after
the ignition switch is turned from ON to OFF (ACC).

If the result is not as specified, there may be a malfunction on the wire harness side or limit switch.

(b) Reconnect the connector to the switch and relay. Check the connector on the wire harness side as shown in the table.

If the result is not as specified, replace the sliding roof control switch and relay.

Sunroof / Moonroof Switch > < Sunroof / Moonroof Relay|Locations|Page 6025