RAV4 2WD L4-2.4L (2AZ-FE) (2004)
/Page-1010002.png)
Required SSTs
Calibration Procedure With Diagnostic Tester
Zero Point Calibration Procedure Using Diagnostic Tester
1.
Connect Diagnostic Tester to DLC3.
2.
Follow the flow below for the calibration procedure. If the vehicle is equipped with automatic transmission (A/T), ensure that the shift lever is in
the "P" range and the parking brake is applied. If the vehicle is equipped with manual transmission (M/T), ensure that the parking brake is applied.
