RAV4 2WD L4-2.4L (2AZ-FE) (2004)
Accelerator Pedal Position Sensor: Testing and Inspection
INSPECTION
INSPECT ACCELERATOR PEDAL POSITION SENSOR
a. Disconnect the sensor connector.
b. Using an ohmmeter, measure the resistance between the each terminals.
Resistance:
If the resistance is not as specified, replace the accelerator pedal assembly.
c. Reconnect the sensor connector.
NOTE:
-
Be careful not to give a shock to the accelerator pedal assembly.
-
Be careful not to disassemble the accelerator pedal assembly.