RAV4 2WD L4-2.4L (2AZ-FE) (2004)
Waveform 1 (Reference):
Oscilloscope Waveform Part 2
Waveform 2 (Reference):
CHECK TRANSPONDER KEY ECU
Terminals of ECU
a. Disconnect the T11 ECU connector, and measure the voltage or resistance between each terminal of the wire harness side connector.
Pinouts
Standard:
If the result is not as specified, there may be a malfunction on the wire harness side.
b. Reconnect the T11 ECU connector, and measure the voltage between each terminal of the connector.