RAV4 2WD L4-2.4L (2AZ-FE) (2004)
/Page-66001.png)
Air Bag Control Module: Service and Repair
Airbag Sensor Connectors
DISCONNECTION OF CONNECTOR FOR AIRBAG SENSOR ASSEMBLY
(a) Pull the lever by pushing the part A as shown in the illustration and disconnect the holder (with connectors).
HINT: Perform the following procedures when replacing the holder.
(b) Remove the holder.
(1) Using a screwdriver, remove the retainer.
(2) Release the claw fitting and remove the holder.
