toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Replacement Requirements|Page 5308 > < Replacement Requirements|Page 5306
Page 7
background image

(g) Cover the steering wheel pad with a cardboard box or tires.

Covering method using a cardboard box:
Cover the steering wheel pad with the cardboard box and weight the cardboard box down in 4 places with at least 190 N (20 kg, 44 lb). 

Size of cardboard box:
Must exceed the following dimensions:
X: 460 mm (18.11 in.) 
Y: 650 mm (25.59 in.) 

NOTICE: 
-

When dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire to which the steering wheel pad is tied, X should
be the following size.
X: 460 mm (18.11 in.) + width of tire 

-

If a cardboard box smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag deployment.

Covering method using tires:
Place at least 3 tires without disc wheels on the top of the disc wheel with tire to which the steering wheel pad is tied.

Tire size: Must exceed the following dimensions:
Width: 185 mm (7.28 in.) 
Inner diameter: 360 mm (14.17 in.) 

CAUTION:  Do not use tires with disc wheels.

NOTICE:  The tires may be marked by the airbag deployment. Use redundant tires.

(h) Deploy the airbag.

(1) Connect the SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

(2) Check that no one is within 10 m (33 ft) area around the disc wheel which the steering wheel pad is tied to.

(3) Press the SST activation switch and deploy the air- bag.

HINT:  The airbag deploys simultaneously with the LED of the SST activation switch illuminating.

Replacement Requirements|Page 5308 > < Replacement Requirements|Page 5306