RAV4 2WD L4-2.4L (2AZ-FE) (2004)
CURTAIN SHIELD AIRBAG SENSOR ASSEMBLY
REMOVAL
NOTICE:
-
Do not open the cover or the case of the ECU and various electrical devices unless absolutely necessary. (If the IC terminals are touched, the IC
may be destroyed by static electricity.)
-
If the wiring connector of the SRS is disconnected with the ignition switch in the ON position, DTCs will be recorded.
1. REMOVE REAR SEAT CUSHION AND REAR SEAT-BACK
2. REMOVE REAR DOOR SCUFF PLATE
3. REMOVE REAR DOOR OPENING TRIM
4. REMOVE REAR SEAT SIDE GARNISH