RAV4 2WD L4-2.5L (2AR-FE) (2009)
(a) Disconnect E85 navigation receiver assembly connector.
(b) Disconnect E81 antenna amplifier connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. INSPECT NAVIGATION RECEIVER ASSEMBLY
(a) Reconnect navigation receiver assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY
OK -- Continue to next step.
4. CHECK OPTIONAL COMPONENTS