toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Procedures|Page 2302 > < Procedures|Page 2300
Page 4
background image

Remove the front bumper cover  See: Body and Frame/Bumper/Front Bumper/Service and Repair/Front Bumper (w/o Under Guard)/Removal.

6. REMOVE GENERATOR ASSEMBLY

(a) Remove the generator assembly See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal.

7. REMOVE BATTERY CLAMP See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Removal and

Replacement/Removal

8. REMOVE BATTERY
9. REMOVE RADIATOR HOSE CLAMP

(a) Disconnect the No. 4 water by-pass hose from the radiator hose clamp.
(b) Remove the radiator hose clamp.

10. DISCONNECT NO. 1 RADIATOR HOSE

(a) Disconnect the hose from the cylinder head.

(b) Disconnect the No. 1 radiator hose from the No. 1 water by-pass pipe.

11. DISCONNECT NO. 2 RADIATOR HOSE

(a) Disconnect the hose from the water inlet housing.

12. REMOVE NO. 1 WATER BY-PASS HOSE

(a) Remove the No. 1 water by-pass hose from the radiator reservoir and No. 1 water by-pass pipe.

13. REMOVE NO. 5 WATER BY-PASS HOSE

(a) Remove the No. 5 water by-pass hose from the radiator and No. 1 water by-pass pipe.

Procedures|Page 2302 > < Procedures|Page 2300