RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-675007.png)
F. Tie the timing chain to ensure it stays properly aligned with the exhaust and crankshaft timing gear pulleys.
6. Remove the exhaust camshaft assembly with exhaust VVT gear.
A. Remove the 11 bearing cap bolts in the sequence shown in the illustration.
B. Using several steps remove the 10 bearing cap bolts in the sequence shown in the illustration.
C. Remove the 5 bearing caps.
Arrange the removed bearing caps in order to ensure they are installed in their original locations during reassembly.
D. Remove the exhaust camshaft assembly with camshaft timing exhaust gear.
E. Place additional ties on the timing chain to ensure it stays properly aligned with the crankshaft timing gear pulley.
F. Place the exhaust camshaft with camshaft timing exhaust gear in a vise.
Cover the vise with tape and only apply pressure to one of the hexagonal portions of the camshaft.
