RAV4 2WD L4-2.5L (2AR-FE) (2009)
Tire Pressure Module: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Install the ECU with the bolt.
Torque: 4.5 Nm (46 kgf-cm, 40 in-lbf)
(b) Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Upper Instrument
Panel/Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. REGISTER TRANSMITTER ID See: Testing and Inspection/Programming and Relearning
5. INSPECT TIRE PRESSURE WARNING SYSTEM