RAV4 2WD L4-2.5L (2AR-FE) (2009)
Hazard Warning Switch: Service and Repair
Removal
LIGHTING: HAZARD WARNING SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.
2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Upper Instrument Panel/Removal
3. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the switch.