RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-2474001.png)
Key Cylinder Lamp: Testing and Inspection
LIGHTING: IGNITION KEY CYLINDER LIGHT: INSPECTION
INSPECTION
1. INSPECT TRANSPONDER KEY AMPLIFIER
(a) w/ Engine immobiliser system:
(1) Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 6, and then check that the light comes on.
OK:
LED illuminates.
If the result is not as specified, replace the transponder key amplifier.
(b) w/o Engine immobiliser system:
(1) Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 1, and then check that the light comes on.
OK:
LED illuminates.
If the result is not as specified, replace the transponder key amplifier.
