RAV4 2WD L4-2.5L (2AR-FE) (2009)
Hazard Warning Switch: Testing and Inspection
LIGHTING: HAZARD WARNING SWITCH: INSPECTION
INSPECTION
1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY
(a) Measure the resistance of the switch.
Standard resistance:
If the result is not as specified, replace the switch assembly.
(b) Inspect the switch illumination.
(1) Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 2 (ILL-), then check that the light comes on.
OK:
LED comes on.
If the result is not as specified, replace the light.