RAV4 2WD L4-2.5L (2AR-FE) (2009)
Engine Control Module: Service and Repair
Installation
2AR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION
INSTALLATION
1. INSTALL ECM
(a) Install the 2 brackets to the ECM with the 4 screws.
(b) Connect the 2 ECM connectors and lower the 2 levers.
NOTICE:
-
When connecting the connector, make sure that dirt, water and other foreign matter is not stuck between the connector and ECM.
-
Make sure that the 2 levers are securely lowered.
(c) Install the ECM with bracket with the 3 bolts.
Torque: 6.5 Nm (66 kgf-cm, 58 in-lbf)
2. INSTALL AIR CLEANER CASE
(a) Install the air cleaner case with the 3 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the harness clamp.
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
(a) Install the air cleaner filter element to the air cleaner case.