RAV4 2WD L4-2.5L (2AR-FE) (2009)
NG -- CONNECT CONNECTOR
OK -- Continue to next step.
36. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 4 JUNCTION CONNECTOR - COMBINATION METER)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CONNECT CONNECTOR
OK -- Continue to next step.
37. CONNECT CONNECTOR
(a) Reconnect the E69 No. 4 junction connector.
NEXT -- Continue to next step.
38. CHECK FOR SHORT TO GND IN CAN BUS WIRE (4WD CONTROL ECU)
(a) Disconnect the E57 4WD control ECU assembly connector.
(b) Measure the resistance of the DLC3.
Standard Resistance: