toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3133 > < Initial Inspection and Diagnostic Overview|Page 3131
Page 4
background image

3. CHECK ABS AND TRACTION ACTUATOR ASSEMBLY (SKID CONTROL ECU)

(a) Disconnect the A19 ECU connector.
(b) Measure the resistance according to the value(s) in the table below.

4. CHECK STEERING ANGLE SENSOR

(a) Disconnect the E11 sensor connector.
(b) Measure the resistance according to the value(s) in the table below.

5. CHECK YAW RATE SENSOR ASSEMBLY

Initial Inspection and Diagnostic Overview|Page 3133 > < Initial Inspection and Diagnostic Overview|Page 3131