RAV4 2WD L4-2.5L (2AR-FE) (2009)
Fuel Pressure Pulsation Damper: Service and Repair
Installation
2AR-FE FUEL: FUEL PRESSURE PULSATION DAMPER: INSTALLATION
INSTALLATION
1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
(a) Apply a light coat of gasoline or spindle oil to the new O-ring of the fuel pressure pulsation damper.
(b) Install the fuel pressure pulsation damper with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTE: Make sure that the O-ring is not cracked or jammed when installing the damper.
2. INSTALL FUEL TUBE SUB-ASSEMBLY
(a) Connect the fuel tube.
(b) Push the fuel tube connector until it makes a "click" sound.
(c) Install the No. 2 fuel pipe clamp.
(d) Install the fuel tube to the fuel hose clamp.