RAV4 2WD L4-2.5L (2AR-FE) (2009)
Crankshaft Position Sensor: Service and Repair
Removal
2AR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL
REMOVAL
1. REMOVE REAR ENGINE UNDER COVER RH See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Removal
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.