RAV4 2WD L4-2.5L (2AR-FE) (2009)
BRAKE CONTROL: VSC OFF SWITCH: REMOVAL
REMOVAL
1. REMOVE SWITCH BASE
(a) Remove the switch base See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower Instrument
Panel/Removal.
2. REMOVE VSC OFF SWITCH
(a) Disconnect the VSC OFF switch connector.
(b) Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the switch base.
HINT: Tape the screwdriver tip before use.
Installation
BRAKE CONTROL: VSC OFF SWITCH: INSTALLATION
INSTALLATION
1. INSTALL VSC OFF SWITCH
(a) Attach the 2 claws to install the VSC OFF switch to the switch base.
(b) Connect the VSC OFF switch connector.
2. INSTALL SWITCH BASE
(a) Install the switch base See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower Instrument
Panel/Installation.