RAV4 2WD L4-2.5L (2AR-FE) (2009)
Trailing Arm: Service and Repair
Removal
SUSPENSION: REAR TRAILING ARM: REMOVAL
REMOVAL
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL
2. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Parking Brake
Cable/Service and Repair/Removal
3. REMOVE REAR TRAILING ARM ASSEMBLY LH
(a) Remove the 3 bolts, nut and trailing arm from the axle carrier and suspension arm bracket.
HINT: While fixing the nut in place, loosen and remove the bolt.