RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-1314003.png)
1. INSTALL FLOOR SHIFT ASSEMBLY
(a) Connect the 2 connectors and attach the clamp.
(b) Install the floor shift with the 4 bolts.
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Turn the nut of the control cable and push in the lock.
(b) Install the control cable onto the shift lever retainer.
NOTICE:
-
Install the cable with the protruding portion of the cable outer facing upward.
-
After installing, check that the lock of the cable outer is protruding beyond portion A-A, as shown in the illustration.
