RAV4 2WD L4-2.5L (2AR-FE) (2009)
/Page-2603002.png)
(a) Apply battery voltage to connector terminals 1 and 2.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.
(b) Check that the motor gear rotates smoothly as follows.
OK:
If the result is not as specified, replace the regulator motor assembly.
4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH Side)
(a) Apply battery voltage to connector terminals 1 and 2.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.
(b) Check that the motor gear rotates smoothly as follows.
OK:
If the result is not as specified, replace the regulator motor assembly.
