RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-1655001.png)
Alarm System Transponder: Testing and Inspection
INSPECT TRANSPONDER KEY AMPLIFIER
a. w/ Engine immobilizer system:
1. Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 6, and then check that the light comes on.
OK: LED illuminates.
If the result is not as specified, replace the transponder key amplifier.
b. w/o Engine immobilizer system:
1. Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 1, and then check that the light comes on.
OK: LED illuminates.
If the result is not as specified, replace the transponder key amplifier.
