toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Interior - Glove Compartment Inoperative/Feels Notchy|Page 8881 > < Interior - Glove Compartment Inoperative/Feels Notchy|Page 8879
Page 3
background image

A.

Open the glove compartment and remove the door stopper from the outside panel by depressing the claw and sliding the stopper off. (Refer
to "1"in the illustration.)

B.

Press in on the glove compartment as indicated by the arrows to release the stop tabs.

C.

Pull the glove compartment toward you releasing it from the two (2) hinge points.

2.

Remove the latch from the glove compartment door.

A.

Remove the two (2) Phillips-head screws from the inside panel of the glove compartment door. (Refer to "2" in the illustration.)

B.

Pull the latch out toward the front to release. (Refer to "3" in the illustration.)

NOTE:

Be careful pulling the latch out. It is connected to the release arms on either end and may be difficult to remove.

3.

Remove the glove compartment slide from the latch.

Interior - Glove Compartment Inoperative/Feels Notchy|Page 8881 > < Interior - Glove Compartment Inoperative/Feels Notchy|Page 8879