RAV4 2WD V6-3.5L (2GR-FE) (2006)
2. Install the sunvisor assembly into the opening in the sheet metal roof panel by grasping the sunvisor assembly with two hands and pushing the bracket
upward as shown in Figure 6.
3. Make sure the sunvisor bracket is flush with the headliner all away around the perimeter of the bracket as shown in Figure 7 and then push the
bracket cover upward to engage all 4 claws at the same time as shown in Figure 8.
4. Confirm the proper operation of the sunvisor and the operation of the vanity light.