toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABS/TCS - Zero Point Calibration Information|Page 5765 > < ABS/TCS - Zero Point Calibration Information|Page 5763
Page 1
background image

Steering Angle Sensor: Testing and Inspection

INSPECTION

1. INSPECT STEERING ANGLE SENSOR

a. Inspect the sensor. If any of the following occurs, replace the sensor with a new one:

-

The surface of the sensor is cracked, dented, or chipped off.

-

The connector or wire harness is scratched, cracked, or damaged.

-

The sensor has been dropped.

ABS/TCS - Zero Point Calibration Information|Page 5765 > < ABS/TCS - Zero Point Calibration Information|Page 5763