RAV4 2WD V6-3.5L (2GR-FE) (2006)
d. Remove the bolt and sensor body from the knuckle.
NOTE: Keep the sensor tip and sensor installation hole free from foreign matter.
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. INSTALL SPEED SENSOR FRONT LH
NOTE: To prevent interference with other parts, do not twist the sensor wire's painted line areas when installing it.
a. Set the sensor body to the knuckle, and then install the sensor with the bolt.
Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf)
NOTE: