RAV4 2WD V6-3.5L (2GR-FE) (2006)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Disassembly & Reassembly
DISASSEMBLY
1. REMOVE ABS AND TRACTION ACTUATOR ASSEMBLY
a. Remove the 2 nuts and actuator from the bracket.
2. REMOVE BRAKE ACTUATOR BOLT HOLDER
a. Remove the 2 bolt holders from the actuator.
3. REMOVE BRAKE ACTUATOR BOLT CUSHION
a. Remove the 3 cushions from the actuator.
REASSEMBLY
1. INSTALL BRAKE ACTUATOR BOLT CUSHION
a. Install the 3 cushions to the actuator.
2. INSTALL BRAKE ACTUATOR BOLT HOLDER
a. Install the 2 bolt holders to the actuator.
3. INSTALL ABS AND TRACTION ACTUATOR ASSEMBLY
NOTE: Do not remove the hole plug before connecting the brake tube. New actuators are filled with brake fluid.
a. Set the actuator on the bracket.
NOTE:
-
Insert the cushion to the pin of the bracket securely.