RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-515011.png)
B. Remove the oil pan by prying between the oil pan and cylinder block with a screwdriver.
NOTE:
Be careful NOT to damage the contact surfaces of the cylinder block and oil pan.
HINT:
Tape the screwdriver tip before use.
C. Remove the 2 O-rings.
D. Using a Torx socket wrench E8, remove the 2 stud bolts:
-
One on the timing cover.
-
One on the lower cylinder block.
13. Remove the water pump assembly by removing the 16 bolts, water pump, and gasket.
