RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-544001.png)
Variable Valve Timing Actuator Position Sensor: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE ENGINE ASSEMBLY
a. Remove the engine.
3. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
4. REMOVE VVT SENSOR
a. Disconnect the 4 sensor connectors.
b. Remove the 4 bolts and 4 sensors.
INSTALLATION
