RAV4 2WD V6-3.5L (2GR-FE) (2006)
Key Cylinder Lamp: Testing and Inspection
INSPECTION
1. INSPECT TRANSPONDER KEY AMPLIFIER
a. w/ Engine immobilizer system:
1. Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 6, and then check that the light comes on.
OK: LED illuminates.
If the result is not as specified, replace the transponder key amplifier.
b. w/o Engine immobilizer system:
1. Connect the battery's positive (+) lead to terminal 2 and the negative (-) lead to terminal 1, and then check that the light comes on.
OK: LED illuminates.
If the result is not as specified, replace the transponder key amplifier.