RAV4 2WD V6-3.5L (2GR-FE) (2006)
Alignment: Service and Repair
Rear Wheel Alignment
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
REAR WHEEL ALIGNMENT ADJUSTMENT
1. INSPECT TIRE
2. MEASURE VEHICLE HEIGHT
3. INSPECT TOE-IN
Standard Toe-In
If the toe-in is not within the specified range, inspect the suspension parts and replace them if necessary.
4. INSPECT CAMBER
a. Install the camber-caster-kingpin gauge or set the vehicle on the wheel alignment tester.
b. Inspect the camber.
Standard Camber
HINT:
-
: w/ 3rd seat
-
Camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and
replace them if necessary