RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-685001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL
1. DRAIN ENGINE COOLANT
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
a. Disconnect the sensor connector.
b. Using SST, remove the sensor and gasket.
SST 09817-33190
INSTALLATION
