RAV4 2WD V6-3.5L (2GR-FE) (2006)
/Page-685002.png)
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
a. Install a new gasket onto the sensor.
b. Using SST, install the sensor.
SST 09817-33190
Torque: 19.6 N.m (200 kgf.cm, 14 ft.lbf)
c. Connect the sensor connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. ADD ENGINE COOLANT
4. CHECK FOR COOLANT LEAKS
