RAV4 2WD V6-3.5L (2GR-FE) (2006)
-
When installing the airbag sensor, be careful that the SRS wiring does not interfere with other parts and that it is not pinched between other
parts.
b. Check that there is no looseness in the installation parts of the sensor.
c. Connect the connector.
2. INSTALL CENTER PILLAR GARNISH LOWER LH
3. INSTALL REAR DOOR SCUFF PLATE LH
4. INSTALL FRONT DOOR SCUFF PLATE LH
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. CHECK SRS WARNING LIGHT
a. Check the SRS warning light.