RAV4 2WD V6-3.5L (2GR-FE) (2006)
Hazard Warning Switch: Testing and Inspection
INSPECTION
1. INSPECT HAZARD WARNING SIGNAL SWITCH ASSEMBLY
a. Measure the resistance of the switch.
If the result is not as specified, replace the switch assembly.
b. Inspect the switch illumination.
1. Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 2 (ILL-), then check that the light comes on.
OK: LED comes on.
If the result is not as specified, replace the light.